Dieu Thinh’s steel ingots are manufactured to enhance the quality of stainless steel in the Vietnamese market and boost our competitiveness in the international arena.
Small Ingots
Components
| C | Si | Mn | P | S | Cr | Ni | Mo | Cu | (Nb+Ta) | |||
| JIS | ASTM/AISI | UNS | % | % | % | % | % | % | % | % | % | % |
| SUS431 | 431 | S43100 | ≤ 0.20 | ≤ 1.0 | ≤ 1.0 | ≤ 0.04 | ≤ 0.03 | 15.0 ~ 17.0 | 1.25 ~ 2.50 | — | — | — |
| 15-5PH | S15500 | ≤ 0.07 | ≤ 1.0 | ≤ 2.0 | ≤ 0.04 | ≤ 0.03 | 14.0 ~ 15.5 | 3.50 ~ 5.50 | — | 2.50 ~ 4.50 | 0.15 ~ 0.45 | |
| SUS630 | 17-4PH | S17400 | ≤ 0.07 | ≤ 1.0 | ≤ 1.0 | ≤ 0.04 | ≤ 0.03 | 15.5 ~ 17.5 | 3.0 ~ 5.0 | — | 3.0 ~ 5.0 | 0.15 ~ 0.45 |
| 450T | S45000 | ≤ 0.05 | ≤ 1.0 | ≤ 1.0 | ≤ 0.03 | ≤ 0.03 | 14.0 ~ 16.0 | 5.0 ~ 7.0 | 0.5 ~ 1 | 1.25 ~ 1.75 | ≥ 8*C | |
| SUS304 | 304 | S30400 | ≤ 0.08 | ≤ 1.0 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 18.0 ~ 20.0 | 8.0 ~ 10.5 | — | — | — |
| SUS316 | 316 | S31600 | ≤ 0.08 | ≤ 1.0 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 16.0 ~ 18.0 | 10.0 ~ 14.0 | 2.0 ~ 3.0 | — | — |
| CF8M | ≤ 0.08 | ≤ 2.0 | ≤ 1.5 | ≤ 0.04 | ≤ 0.04 | 18.0 ~ 21.0 | 9.0 ~ 12.0 | 2.0 ~ 3.0 | — | — |
| GRADE | C | CR | NI | SI | MN | P | S | CU | NB | MO | N | V | CO | O | AL | W |
| 303S | <0.1 | 18.0-21.0 | 9.0-12.0 | 0.5-1.0 | 1.2-1.5 | <0.04 | 0.15-0.4 | <0.5 | <0.2 | 0.4-0.8 | <0.05 | <0.2 | <0.3 | <0.05 | <0.08 | |
| 304 | <0.07 | 18.0-20.0 | 8-10.5 | <1 | <1.5 | <0.04 | <0.03 | <0.5 | <0.2 | <0.2 | <0.2 | <0.25 | ||||
| 304 (type 2) |
<0.05 | 18.0-20.0 | 8-10.5 | <1 | <2 | <0.045 | <0.01 | <0.4 | ||||||||
| 316 | <0.08 | 16.0-18.0 | 10.0-14.0 | <1 | <2 | <0.045 | <0.03 | <0.5 | – | 2.0-3.0 | – | – | – | – | – | |
| 17-4 | <0.05 | 15.0-15.80 | 3.6~4.4 | <1 | <1 | <0.04 | <0.03 | 2.8-3.5 | 0.15-0.45 | <0.5 | < 0.05 | <0.2 | <0.15 | <0.05 | <0.05 | |
| 17-4 Type 2 |
<0.05 | 16.0-17.0 | 3.6-4.4 | <1 | <1 | <0.04 | <0.03 | 2.8-3.5 | 0.16-0.4 | <0.5 | < 0.05 | <0.15 | ||||
| CF8M | <0.07 | >18.2 | >9.2 | <1.5 | <1.5 | <0.04 | <0.04 | <0.5 | – | >2.1 | – | – | – | – | – | |
| 430 | <0.1 | 16.0-18.0 | <0.6 | <0.75 | <1 | <0.04 | <0.03 | <0.5 | <0.1 | <0.2 | – | <0.2 | – | – | – | |
| 430 Type 2 |
<0.045 | 16.0-18.0 | – | <1 | <1 | <0.04 | <0.03 | – | – | – | – | – | – | – | – | |
| 431 | <0.08 | 15.0-17.0 | 1.5-1.8 | <1 | <1 | <0.04 | <0.04 | <0.5 | <0.2 | <0.5 | < 0.05 | <0.2 | <0.15 | <0.05 | <0.05 | |
| 431 Type 2 |
<0.05 | 16.2-16.6 | 2.0-3.0 | <0.75 | <0.75 | <0.04 | <0.03 | <0.2 | <0.2 | <0.15 | <0.04 | |||||
| 431 Type 3 |
0.18-0.2 | 15.0-17.0 | 1.25-2 | <1 | <1 | <0.04 | <0.03 | |||||||||
| 431 Type 4 |
<0.1 | 15-17 | 1.25-2.5 | <0.8 | <0.8 | <0.04 | <0.01 | <0.1 | – | – | < 0.05 | – | – | – | ||
| 450 | <0.05 | 14.0-15.5 | 5-5.6 | 0.4-0.8 | <1 | <0.03 | <0.03 | 1.25-1.75 | 0.2-0.4 | 0.5-1.0 | <0.035 | <0.2 | <0.15 | <0.035 | ||
| 450 (Type 2) |
<0.06 | 14.0-16.0 | 5.0-7.0 | <1 | <1 | <0.03 | <0.01 | 1.25-1.75 | >8*C | 0.5-1.0 | <0.05 | – | – | – |
Components
- Used in the field of mechanical casting, machine manufacturing, ship equipment, automobile components,…
- Used to manufacture engine shafts, light and medium load shafts,…
- Main material used in the field of rolling and forging stainless steel
Components
- Minimize the risk of component quality
- Shorten production process
- Save management and production cost
Specification
| Upper side (mm) | 45 x 445 mm (Width x Length) |
| Below side (mm) | 85 x 515 mm (Width x Length) |
| Height (mm) | 85 mm |
| Weight (kg) | 17 kg |
Packing
| 1300 – 1550 | kg / package |
| 77 – 91 | tpc / package |
| 19 – 20 | package / cont 20” |
| 475 – 540 mm | Package height (without pallet) |
| 630 – 680 mm | Package height (included pallet) |
Other Products
Steel Scrap
Big Ingots
